Adding a Camelbak to the Kelty FC3

Some climbing friends of ours gave us a Kelty Kid Carrier FC 3.0 when we had our baby shower. If you aren’t aware, it’s a backpack that you can carry your gear as well as your child in. Everything on the pack seemed really well thought out and was really nice except I couldn’t find a place for a camelbak. Anyone that knows me knows that I try to hydrate a lot. When we go climbing I usually have 4.5 liters of water just for me for the day; maybe a little less if it isn’t hot. So through some playing around I was able to work out a system where I could attach a camelbak bladder to the pack and still not lose any functionality or storage.

First off, I found some space to store the bladder behind where the child sits. If you notice in this picture you can see the handle and above the handle you can see there is the frame and it’s pretty beefy. I then accessed the frame and the space by unvelcroing and unsnapping the area above the lower storage. I then found some extra webbing I had around the house and wrapped the webbing around the top of the frame between the frame and the frabric shell of the pack. Make sure your webbing fits the plastic hook on the camelbak before attaching it to the pack. Since I am a climber I used a figure 8 knot to create a loop in the webbing but you can use an overhand or whatever knot you feel comfortable with. This loop is used to hang the camelbak bladder off of. This part was a little difficult because I had to do all of this without being able to see what my hands, the webbing or the knot.

Next I used the plastic hook on the camelbak bladder to attach the bladder to the loop I made with the webbing. This again takes a little time because you have to feel around and you can’t see your hands, the hook, or the loop while doing this. After it’s attached, I made sure the bladder is inside the opening and re-attched the velcro and snaps. The tube from the bladder goes through the velcro and I wrapped it around to the front strap. Then you are good to go!

4 Replies to “Adding a Camelbak to the Kelty FC3”

  1. I love my Camelbak hydration pack. I always use it when i go bike riding so im happy you got one! Its good to know that Camelbak makes great products that you can trust. I’ve been using their water bottles for years.
    Thanks for the great blog!

  2. Been a long time since you posted this but I have used my FC3 for a long time now and never had a bladder, was one of my chief complaints with the pack. Getting ready to do a lot more camping and hiking with the family and found your wife’s review of the pack then the link here. I appreciate the idea. I used 550 cord with a clove hitch to the frame and had already made my loop using a traditional angler’s loop. Seems to be good so far.

  3. The issue of scrolling horizontally or vertically
    comes in this regard. To find out more about a dedicated web design firm, simply use the links below
    now and be directly connected to a professional ROI and Web
    Design conversions expert. The basics always remain the same but there are
    many updating in software and the principles associated with them.

Leave a Reply to Micah Cancel reply

Your email address will not be published. Required fields are marked *

*

*